If you’re planning to build a complete bathroom but refuse to dig down to your basement, the SaniPLUS Upflush Toilet Kit provides excellent solution to your problems.
The SaniPLUS Upflush Toilet Kit is relatively cheap compare to ripping up your basement floor.
The SaniPLUS Advantage
The beauty of SaniPLUS Upflush Toilet Kit is it installs a complete bathroom up to 15-feet below the sewer line and up to 150-feet away from soil stack.
The SaniPLUS pump is designed to connect not only the toilet but also any Sink, any Shower and any Bath that completes your bathroom needs.
>>Click Here to check the price and discover what people are saying about the SaniPLUS Upflush Toilet Review.
The SaniPLUS Upflush Toilet has been certified to pass the American and Canadian standards and macerating standard as well that proves its excellent effectiveness. With its innovative functions it is now possible for you to install a complete bathroom without any tedious and expensive structural work.
How It Works?
The SaniPLUS Upflush Toilet consists of pressure chamber that causes to start and stop the unit. Inside of it is a motor that drives the stainless steel macerator blades and the pump as well.
When the toilet flushes the water that flows into the SaniPlus triggers the microswitch in the pressure chamber that causes the motor to start. The motor is sealed in oil filled enclosure permanently that stays in good shape for longer period of time.
The spindle drives the impeller and the macerator blades directly so that moving parts are minimal that may complicate its operation. The macerator blade rotates at 3,600 rpm that reduces to slurry the water and waste matter that enters the chamber.
The force it creates causes the solids to reduce and to be cast out into the grill then the container where it is to be pickup by the impeller pump which is mounted beneath the motor.
The pump produces an equivalent of 10 PSI that pumps the waste matter in upward direction of 15-feet or up to 150-feet in horizontal direction.
After discharging the effluent the water level goes back to normal that causes the microswitch deactivates the unit.
The entire process takes only 15 to 18 seconds depending on the discharge pipe run configuration while the power consumption is kept to nominal level.
The SaniPLUS Upflush Toilet is not only limited for toilet waste, it can also handle gray water waste coming from other sanitary fixtures such as hand basin, bidet, bath and urinal.
The SaniPLUS Upflush Toilet provides another two inlets for your other sanitary fixtures discharge via 1.5 inch inlets. You can use either one or both of them to maximize its usage.
The discharge elbow on top of the unit can be simply adjusted to the left or to the right depending on your desired discharge installation.
For total simplicity, it comes with only four connections. The center hole is connected directly to the toilet and the two holes on top is for other fixtures while the bottom hole is for the outlets.
The SaniPLUS Upflush Toilet automatically adjusts the input rate from its other sanitary fixtures though; it always gives the priority from the discharge coming from the toilet.
This makes it possible a simple float mechanism. In case the bath and the toilet discharge at the same time the water coming from the toilet stops the water from the fixtures for a few seconds until the waste from the container subsides.
This causes the float to open the valve and the discharge coming from the fixtures resumes and next to be dealt with.
The SaniPLUS Upflush Toilet is an ADA compliance that gives you total comfort while sitting on the toilet bowl. Its additional height provides painless sitting and standing on the toilet that greatly benefits the elderly and persons with knee and back problems.
Rigid And Elegant Design
The SaniPLUS Upflush Toilet comes with elegant design in white color that perfectly blends in any bathroom motif. The unit is made of well selected materials from Vitreous China, Polypropylene, C.R.P., Stainless Steel and Neoprene that stays in top shape for longer period of time.
The SaniPLUS Upflush Toilet is designed to save water. It uses only 1.6 gallons of water per flush (GPF) which is by far less than any conventional toilet with 3.5 to 6 (GPF).
That being said, you can save thousands of gallons of water every year that tremendously reduces your water bill.
What’s Included In The Box?
The SaniPLUS Upflush Toilet kit includes the macerating bathroom pump, white toilet bowl, white toilet tank and an optional extension for behind the wall installation.
The package also includes a SaniPLUS manual and simple to follow step-by-step installation guide. The kit is backup with 1-year warranty and top of the line customer service that is always ready to help you.
Watch the video of the SaniPLUS Upflush Toiletto learn more…
The SaniPLUS Upflush Toilet Kit delivers great solutions to households that need a complete bathroom that doesn’t required expensive structural work.
Its simple installation process makes it possible to anyone to setup without experience needed.
The design is excellent and saves you water in the long run. Customer service is top notch that is always available to help you.
Its excellent performance is proven by customers who are using it. It brings more features on the table that adds to its value. >>Click Here to get it at its Lowest Price!