Looking for toilet that will fit in a small half bath?
The Saniflo 023 SANICOMPACT 48 Toilet Review deserves a hard look. The Sanicompact is a self contain macerating toilet which is design to fit in tight spaces where ordinary toilets can’t.
This makes it ideal to install in various locations of your home such as basement, attic, ground floor, upper floor, stairway, bedrooms and even at your garage.
Anyone can fix it with its dead simple installation process thus saves you money from hiring a professional plumber.
>>Click Here to check the price and discover what people are saying about the Saniflo 023 SANICOMPACT 48 Toilet Review.
What is in it?
The Saniflo 023 SANICOMPACT Toilet doesn’t need an external water tank since its flushing mechanism is already built inside the toilet and completely electric powered. The SANICOMPACT is not only for toilet waste but it also accommodate your wastewater from the sink.
Its internal mechanism consists of .3 Horse Power having 3,600 rpm that runs with 110v to 115v 7.2Amp AC electrical supply. With this kind of power it can easily eliminate maximum bulk of waste. After flushing you’re completely done within 10 to 15 seconds.
It requires only 1-inch diameter discharge pipe line. It can transfer waste with vertical discharge effectual up to 9-feet and horizontal discharge effectual of 100-feet. The toilet’s physical dimension is 15.75 x 14.5 x 18.25 inches that perfectly fit in any limited space bathroom.
How It Works?
Saniflo 023 SANICOMPACT Toilet doesn’t require a tank which the flushing action and the macerating pump cycle are fully automatic when you press the flush button. It is located on the top of the bowl that consists of air switch for fast and painless operation.
The Saniflo 023 SANICOMPACT 48 Toilet permits only 1-gallon of water to pass through the toilet every time you flush. Its flushing mechanism is fully electronically timed that performs the entire action.
For super easy installation the back elbow of the Saniflo 023 SANICOMPACT 48 Toilet can be rotated at 360-degrees that fit in any installation angle requirement. There’s a built-in non return valve on the discharge elbow that prevents the back flow into the unit.
This toilet is a forced main that doesn’t require to be vented and connected to a vent stack while other fixtures need to be vented. Though, the SANICOMPACT is highly recommended for the macerator/pump to be connected to a ground fault interrupter circuit.
The Saniflo 023 SANICOMPACT 48 Toilet is designed to save water. It consumed only 1-gallon of water per flush which is very efficient and it doesn’t sacrifice its performance.
It can powerfully remove maximum bulk of waste in just a single flush. That being said, you can save thousands of gallons every year that will sure cut your water bill.
The Saniflo 023 SANICOMPACT 48 Toilet is built with top quality component. It consists of Vitreous china polypropylene, stainless steel and neoprene construction that stays in good shape for years to come.
The toilet comes with modern design with a very stylist seat that will perfectly blend in any type of bathroom blueprint.
Watch the video of the Saniflo 023 SANICOMPACT 48 Toilet for its complete installation process…
The Saniflo 023 SANICOMPACT 48 Toilet is performs well and provides solution to consumer with limited bathroom space and doesn’t want to dig their basement.
In fact having the Sanicompact is a lot cheaper than doing some remodeling with your bathroom. Installation is easy even a disabled customer proves it.
Though, some are complaining about the manual. Customers are suggesting that the toilet seat should be the last to be installed. The only disadvantage I found in here is that, it doesn’t work if the electric power is gone. >>Click Here to get it at its Lowest Price!