So, your toilet is clogged, right? I know how frustrating it feels when your toilet is clogged, everyone does. If the water from your bowl overflows and spills on the floor that makes it messy is definitely alarming.
No need to panic and don’t call a plumber yet. In fact, this can
be easily fix and most clog can eliminate with a plunger. This plumbing problem
is common to every household, you’re not alone.
However, most of the time people don’t know what is the proper way
to eliminate those clog.
In this article I’m going to show you the correct and easy way to
unclog your toilet. All you need is the appropriate plunger for this task.
Yes, you read it correctly, the appropriate plunger. Why you need
Because, there are two types of plungers for different plumbing
fixtures. In fact, there is minimal chances or none at all you can solve your
toilet clog with the wrong plunger.
Most often people are using the sink plunger or commonly known as
the cup plunger to unclog their toilet that doesn’t work. It is a rubber cup
with a dome shape that comes in a flat end.
The cup plunger works perfectly with kitchen sink, shower floor
sink and bath tub sink but never with the toilet. The flat bottom end feature
of this plunger sealed the floor so that the air can flow forcefully to push
the clog underneath.
However, using it on your toilet doesn’t seal the bowl due to the
fact that it is not a flat surface. As a result, no air can flow on your toilet
trapway to push down the clog.
The toilet plunger or a flange plunger is the right tool to unclog your toilet. To give you a perfect vision of it, the cup in the toilet plunger is physically taller compare to a sink plunger. In addition to that, it has an extension cup on top of it which is called the flange.
The extension cup or the flange perfectly fit into the hole of any
toilet bowl. Together with the larger cup this creates a perfect seal on the
toilet hole so that no air can pass through it thus, creating a powerful push
that removes the clog.
Two In One
The good thing about the toilet plunger is that it can also be
used as a sink plunger. How? The flange in the toilet plunger can be fold and use
it to your sink.
Okay then, that’s all for the plunger let us now do the job. The
following easy to follow steps is the key to successfully unclog your toilet.
Add enough water on the bowl for about half full. Or maybe at this point of time your toilet bowl is filled with water due to clog. In this case, you don’t need to add more water in it. This will ensure a proper seal on the opening of the toilet plunger.
Fully extend the flange cup of the toilet plunger.
Put the plunger into the bowl trapway opening. Let the cup fills with water so that it will increase the pushing force you apply into it. Properly position the plunger to fit the flange into the toilet trapway until the dome cup seals around the hole.
Grasp the plunger handle as much as possible using your both hands. Then forcefully push down the plunger and pull up in rapid motion to send sufficient pressure.
The main objective here is to generate repetitive force to push down and remove whatever the cause of clog underneath the drainage.
doing this procedure be sure to not to break the plunger seal around the bowl
If it appears like there is no pressure transferring from the
plunger unto the hole it is most likely that there is no proper seal and the plunger
is in the wrong position. Just reposition the plunger until you get the right
Repeat the plunging motion if necessary until the water into the
bowl goes down.
Flush the toilet and it will probably back to its normal flushing
action without the clog.
Most people are asking what is the best, fast, cheap and easy way to remove toilet bowl stains. Although, some of them clean their toilet regularly but somehow there are still stains which is hard to remove. I know the fact that this is so frustrating. Me too, tries different cleaning solution and end up hurting my toilet while the stain remains.
Keep in mind that toilets
are made of porcelain and pouring some strong chemicals on it will damage its
surface. While using highly abrasive brush causes scratches on your toilet
bowl. Therefore, it is better for you to use a nylon bristle brush for
scrubbing rather than the old fashioned wire brush.
Some home owner
uses bleach on their toilet but in most cases it will only makes the hard water
stain worse and permanent.
is that never ever mix the bleach with ammonia. This will cause fatality to
anyone who inhale it and can lead to respiratory ailment. This will also damage
your septic system.
Others recommend the
pumice stone instead of brush but, you better be careful when scratching your toilet
bowl. If plan to take this route you may want to leave some water inside the
bowl while cleaning to prevent the porcelain from scratching.
How To Clean A Badly Stained Toilet?
After finding some
of the best natural toilet cleaner that will cost you less yet fast, easy and
very effective I’m here to share it all with you.
Determine The Types Of Stains
Toilet stains can
be categorized in different types and build overtime due to the kinds of
minerals associated with water. However, the most common of these are the mold,
mildew and hard water.
Mold stains can be
present anywhere in your toilet but most commonly inside your tank. Molds
develop in dark and damp places therefore it is no surprise if you find it in your
toilet. This cause from calcium deposit build up came from the water. If any
member of the family has a higher glucose level from diabetes your toilet will
probably develop more mold.
Mildew can develops
when water sits in one place over a period of time. This commonly found in top
of the toilet bowl and under the rim.
Hard Water Stain
Hard water stain looks like a ring around the inner bowl of the toilet where the water sits in. This causes a mineral build up from calcium, lime, chalk and magnesium. Although, this is most common of all but, it is also the hardest thing to clean and remove.
Clean Your Toilet With Vinegar
Vinegar has a natural cleaning ingredient that keeps your bowl spotless. In fact vinegar alone is enough to clean your toilet bowl. It doesn’t have any harmful chemical which is commonly found in most toilets cleaner. It is way cheaper compare to those commercially branded toilet cleaner.
the 5 simple steps to clean your toilet using vinegar
Step 1- Simply turn off the water supply then flush the toilet. This will drain the water from your toilet.
Step 2 – Afterwards, pour the vinegar into your toilet bowl. You can also use a spray bottle to directly spray the vinegar into the stain.
Step 3 – Scrub the bowl until the stain is gone. Always use the nylon bristle brush to prevent your bowl from scratching.
Step 4 – Turn on the water supply and wait until the tank is full.
Step 5 – Flush the toilet to remove the stains and you’re done.
Cleaning The Toilet Bowl With Vinegar And Baking Soda
If you want a more powerful cleaning solution you can mix a baking soda with the vinegar.
Baking soda also poses an outstanding natural cleaning ingredient. Thus combining it with vinegar results in a more powerful cleaning solution yet they are cheap, safe and easy to use. It produces a carbonic acid which is ideal for removing the toughest stains on your toilet bowl.
The following steps will guide you through the simple cleaning procedure
Step 1 – Turn off the water supply then flush the toilet to drain the water from your toilet.
Step 2 – Sprinkle a cup of baking soda into your toilet bowl
Step 3 – Spray or pour a cup of vinegar into your toilet bowl
Step 4 – Let the vinegar and the baking soda sits for about 30-minutes This process will allow the natural cleaning ingredients of the vinegar and baking soda to ease up your scrubbing.
Step 5 – Scrub the bowl with nylon bristle until the stain
is completely gone.
Step 6 – Turn on the water supply and flush the toilet and you’re done. Remember that vinegar and baking soda doesn’t do any harm to your plumbing.
Use Borax To Clean Your Toilet
Using Borax to
clean your toilet is another brilliant way yet cheap, fast, safe and easy.
Borax is a powder solution that has a powerful cleaning capability. This is
rarely found in grocery store and supermarket but commonly available in any
These simple steps
will guide you through the process
Step 1 – Turn off
the water supply the flush the toilet to drain the bowl
Step 2 – Sprinkle the
powder into the bowl where the stain resides
Step 3 – Scrub it
with the nylon bristle brush
Step 4 – Let it
sits for 30-minutes
Step 5 – Afterwards,
brush off the remaining stains
Step 6 – Turn on the water supply then flush the toilet when the tank is full and you’re done.
How To Clean Toilet Bowl Stains With Coke
Does Coca Cola clean toilet stains?
Definitely YES. Some people heard about the cleaning capability
of Coca-Cola. But, for those who didn’t know it yet will shock them if I tell
you that it can really does clean your toilet stains.
Everybody loves to drink the famous Coca-Cola like I do. It
has an acid mixture into its components but a fairly low content therefore it
doesn’t hurt your toilet when you use it for cleaning. The main cleaning
ingredients of Coke are the carbonic and phosphoric acid content of it.
It is available at a very cheap price such as less than 50
cents a liter. Coke is safe to all humans and especially to your toilet bowl. This
will definitely blows away any toilet cleaners yet it is available everywhere.
Here are the simple steps to follow to clean your toilet
Step 1 – Turn off the water system and flush to empty the
Step 2 – Pour the coke into the bowl with two to three cups.
You can also use a bottle spray to reach those under the rim hole.
Step 3 – Let the coke sit for quite some time at least an
hour. However, others prefer an overnight. The longer the Coke sits in the bowl
the better it breaks the stain.
Step 4 – When the stain is loosening up, it is time for you
to scrub the bowl until all the stain is gone.
Step 5 – Turn on the water supply and flush when the tank is
Step 6 – If there are still few traces of stain you may want
to repeat the whole process.
If your stains just won’t seem to go away with a second application of
Coke, check out the section below, which has suggestions for especially
hard-to-remove toilet stains.
If your toilet
seems to have a badly stained that sits in there for a long time this next
section will definitely worth doing.
How To Remove Hard Water Stains From Toilet
Hard water stain is the hardest to remove as I said earlier. In this case you need to combine the Coke with other toilet cleaning ingredients as I mentioned above. For the best solution use Coke together with vinegar, baking soda and Borax.
Step 1 – Prepare ½ cup
of vinegar and ¼ cup of baking soda and mix them both into 2-liter of
Coca-Cola. You can substitute the Borax with the Baking soda with two teaspoon
Step 2 – Turn off
the water supply and flush the toilet to empty the bowl.
Step 3 – Pour the
mixture of into the toilet bowl.
Step 4 – Let it sit
for an hour.
Step 5 – Scrub the
bowl until the stain is gone.
Step 6 – Open the
water supply line then flush the toilet when the tank is full and you’re done.
ingredient will do better in cleaning your bowl stain is by adding a lemon
juice and mix it with Borax and Coke. Do the same steps as above and you’re
good to go.
I hope this article
gives you more useful ideas to ease up your cleaning with your toilet bowl
stain. My advice is to clean your toilet regularly to keep it in good shape.
The chemicals that
I recommend above are all safe to use, very cheap while the simple steps are
super easy to do.
Avoid those stains to
sit in your bowl for a long time that will lead to an almost impossible to remove.
knows how important the toilet in our home. We always make sure that we’ll have
the maximum comfort it can offer to keep us safe and easy to use without any hassles.
Some of these tips may help you to decide the best toilet that suits you.
popular type of toilet is the gravity toilet because, it has many advantage
over the other type. It easily drops the water from the tank as you flush the
switch. With all the gravity of the falling water from the tank, makes it the
most convenient way to pull down your waste without any effort. This type of
toilet design also has a quiet flush that doesn’t disturb anyone who sleeps at
night as well as it doesn’t frighten your little child. It has a very simple
mechanical device that makes it the easiest to repair, even without any
knowledge about it can do. The gravity toilet also comes in a very affordable
According to U.S. EPA (Environmental Protection Agency), a household toilet consumes almost 30 percent of total water usage making it one of the biggest wastes if not properly treated. Older toilet models consumes about 3.5 gallon of water per flush (gpf), replacing it with the newer version with only 1.6 gpf with higher efficiency that helps you to conserve water, this will also cutoff you’re your water bill.
10 Things You Should Know In Choosing The Best Toilet
consider a lesser water consumption, some toilet offers a higher efficiency
with less than 1.6 gpf. This will help you to cut further your water bill.
for the flush performance including the flush mechanism. Performance can be
measured by grams of solid waste removed in a single flush. This is important
so that you don’t need to double your flush in most cases. Find reviews that
that shows its performance, these are often measured by grams of solid waste
removed per flush.
Consider its durability to serve you for years without any problems with low
maintenance. Also look for the quality of its handle, Is it easy to break?
Because, you can be amazed how many times you’re flushing it every day, every
month or a year.
to clean with less effort, does the bowl remain clean with every use? Maybe you
don’t want to scrub your toilet frequently.
comfortable you are with your chosen toilet? Consider its size and shape, oval
or rounded. Is it the right height for the entire family? Do you want to add
some luxury in it for additional comfort?
Materials being used. Does it match with your bathroom style, design and color?
to install. Does it bring any complication when you’re installing it?
Dimensions. Does it fit your bathroom area? Does your chosen shape provide an
ideal clearance on all sides of the wall?
Availability of the replacement parts.
but not the least is the price. This is always been the most sensible part of
your toilet. It doesn’t mean that, a high priced toilet is always the best
performer. Or a low priced is a crap.